Nichrome Wire (100gm) Manufacturer,Supplier and Exporter in India
Product Code : SCL-EAE-11252
Nichrome is a nickel-chromium resistance-alloy family commonly used where electrical resistance and resistance to oxidation at elevated temperature are required. In educational laboratories, a measured wire length can be incorporated into a controlled circuit to demonstrate resistance, electrical heating and conductor behaviour.
The product is supplied in a nominal 100 gm quantity. The exact alloy composition, wire gauge, diameter, total length, resistance per metre, maximum operating temperature, surface coating and insulation status are not specified. Buyers should confirm these parameters before selecting the wire for a prescribed experiment, replacement part or tender requirement.
Key Features
Nominal 100 gm pack: Provides a practical quantity for laboratory storage and repeated classroom activities.
Resistance-wire application: Supports suitable experiments involving resistance and electrical heating.
Useful for length comparisons: Allows resistance to be compared across measured wire lengths.
Adaptable supply format: The wire may be cut into sections according to the practical procedure.
Supports circuit learning: Can be incorporated into approved, current-limited low-voltage circuits.
Hands-on STEM value: Connects electrical theory with measurement, observation and calculation.
Suitable for supervised demonstrations: Supports structured school, college and vocational laboratory work.
Technical Specifications
|
Specification |
Detail |
|
Product name |
Nichrome Wire (100gm) |
|
Brand |
Lab Exports |
|
Product category |
Electrical and Electronics Laboratory Consumables |
|
Wire type |
Nichrome resistance wire |
|
Nominal pack weight |
100 gm |
What's Included in the Kit
One nominal 100 gm supply of nichrome wire
A spool, connecting leads, circuit board, power supply, measuring instruments and experiment manual are not confirmed as included.
Applications / Uses
Studying electrical resistance of a wire
Demonstrating the heating effect of electric current
Investigating resistance against conductor length
Preparing suitable experimental resistance coils
Supporting Ohm’s law activities
Comparing resistance-wire materials
Conducting supervised electronics and STEM practicals
How to Use the Nichrome Wire (100gm)
Confirm the required wire gauge and safe current limit.
Inspect the wire for kinks, corrosion or surface damage.
Measure and cut the required length with a suitable wire cutter.
Secure the wire between heat-resistant terminals without overstretching it.
Connect the circuit to a current-limited, low-voltage laboratory supply.
Increase current gradually while monitoring the wire and instruments.
Record the required voltage, current or temperature observations.
Switch off the supply and allow the wire to cool before handling.
Safety note: Nichrome wire can become extremely hot. Never connect it directly to mains electricity. Use heat-resistant supports, eye protection and trained supervision.
Care & Maintenance
Store unused wire in a dry, labelled container.
Avoid sharp bends, crushing and excessive stretching.
Allow heated wire to cool fully before storage.
Discard wire showing severe oxidation, thinning or deformation.
Why Choose Lab Exports
Lab Exports manufactures and exports scientific instruments, educational experiment setups, science kits, mathematics kits, didactic models and STEM products. Buyers can explore related electrical and electronics laboratory equipment, the wider physics laboratory equipment range and compatible laboratory meters. Wire gauge, resistance, alloy grade and operating limits should be confirmed in the commercial quotation.
Frequently Asked Questions
What is Nichrome Wire (100gm) used for?
It is used for suitable resistance, heating-effect, Ohm’s law and low-voltage electrical experiments. The exact application depends on the wire gauge and resistance.
How much wire is supplied?
The product is supplied as a nominal 100 gm quantity. The corresponding wire length depends on its diameter.
What is the wire gauge?
The gauge or diameter is not specified. State the required SWG, AWG or metric diameter in the enquiry.
Is the wire insulated?
Insulation or coating is not confirmed. Treat it as uninsulated unless the current specification states otherwise.
Can nichrome wire become red hot?
It may become very hot when sufficient current passes through it. Any heating experiment requires controlled current and suitable heat-resistant supports.
Can it be connected directly to mains power?
No. Use only a suitable current-limited, low-voltage laboratory supply under trained supervision.
Confirm the required gauge and resistance value with Lab Exports, or browse the complete laboratory equipment range for institutional and export procurement.
Recommended Product Image ALT Text
Nichrome wire 100gm for physics laboratory resistance experiments
Nichrome resistance wire supplied on laboratory spool
Electrical heating wire for supervised STEM experiments
100 gm nichrome wire for school electronics practicals
Nichrome laboratory wire supplied by Lab Exports
