Manganin Wire (100gm) Manufacturer,Supplier and Exporter in India
Product Code : SCL-EAE-11246
Manganin wire is commonly selected for resistance-related laboratory activities because manganin is used where relatively stable electrical resistance is required. In classroom experiments, a measured length of wire can be connected within an approved low-voltage circuit to investigate resistance, voltage, current and resistivity.
The product is supplied in a nominal 100 gm quantity. Wire gauge, diameter, total length, alloy composition, surface finish, insulation status, resistance per unit length and temperature rating are not specified. Buyers should confirm these parameters before selecting the wire for a prescribed experiment, replacement requirement or tender.
Key Features
Nominal 100 gm pack: Provides a manageable quantity for laboratory storage and classroom distribution.
Resistance-experiment material: Suitable for compatible investigations involving conductor resistance and resistivity.
Supports circuit learning: Can be incorporated into approved low-voltage experimental circuits.
Useful for wire-length studies: Allows resistance to be compared across measured lengths when the wire specification is known.
Adaptable laboratory consumable: Can be cut into sections according to the practical method.
Suitable for supervised STEM work: Supports hands-on electricity and measurement activities.
Compact supply format: Convenient for school, college and technical laboratory inventories.
Technical Specifications
|
Specification |
Detail |
|
Product name |
Manganin Wire (100gm) |
|
Brand |
Lab Exports |
|
Product category |
Electrical and Electronics Laboratory Consumables |
|
Wire type |
Manganin wire |
|
Nominal pack weight |
100 gm |
What's Included in the Kit
One nominal 100 gm pack of manganin wire
A spool, circuit board, connecting leads, measuring instruments, power supply and experiment instructions are not confirmed as included.
Applications / Uses
Studying electrical resistance of a wire
Investigating resistance against conductor length
Determining resistivity with compatible measuring apparatus
Preparing suitable resistance coils
Supporting Ohm’s law experiments
Comparing conducting materials
Conducting supervised electrical STEM activities
How to Use the Manganin Wire (100gm)
Confirm the required wire gauge and circuit conditions.
Inspect the wire for kinks, corrosion or surface damage.
Measure the required length accurately.
Cut it with an appropriate wire cutter.
Secure the wire between suitable terminals without excessive tension.
Connect the approved voltmeter, ammeter and current-limited power supply.
Apply low voltage briefly and record the required readings.
Safety note: Never connect the wire directly to mains electricity. Excessive current can heat the wire rapidly. Use a current-limited laboratory supply under trained supervision.
Care & Maintenance
Store unused wire in a dry, labelled container.
Avoid sharp bends, crushing and unnecessary stretching.
Disconnect experimental sections immediately after use.
Discard wire showing corrosion, overheating or permanent deformation.
Why Choose Lab Exports
Lab Exports manufactures and exports scientific instruments, experiment setups, educational models, science kits and STEM laboratory products. Buyers can explore related electrical and electronics laboratory equipment, the wider physics laboratory equipment range and compatible laboratory measuring instruments. Wire gauge, resistance characteristics and package configuration should be confirmed in the commercial quotation.
Frequently Asked Questions
What is Manganin Wire (100gm) used for?
It is used for suitable resistance, resistivity, Ohm’s law and electrical circuit experiments. Its exact application depends on the wire gauge and resistance characteristics.
What quantity is supplied?
The product is supplied as a nominal 100 gm pack. Any commercial weight tolerance should be confirmed before ordering.
What is the diameter of the wire?
The wire diameter or standard wire gauge is not specified. State the required SWG, AWG or metric diameter in the enquiry.
Is the wire insulated?
The presence and type of insulation or coating are not confirmed. Do not assume electrical insulation without verification.
Can it be used for an Ohm’s law experiment?
Yes, when the selected gauge, length and resistance are suitable for the approved low-voltage circuit and measuring instruments.
Can it be connected directly to mains power?
No. Use only a suitable current-limited, low-voltage laboratory power supply under trained supervision.
Request the required gauge and resistance details from Lab Exports, or browse the complete laboratory equipment range for institutional and export procurement.
Recommended Product Image ALT Text
Manganin wire 100gm pack for physics laboratory experiments
Manganin resistance wire supplied on laboratory spool
Electrical experiment wire for resistance and resistivity study
100 gm manganin wire for school physics practical work
Manganin wire laboratory consumable from Lab Exports
