Autoclaves Manufacturer, Suppliers and Exporter in India

Autoclave models and house codes

All seven products in this subcategory are listed below with the main specification from each product page.

Where these autoclaves are used

A laboratory autoclave sterilises instruments, glassware and culture media with steam under pressure. In school and college microbiology practicals it is used to prepare sterile media and equipment before an experiment. The Classic Standard Autoclave is designed for school and educational laboratories, with one-touch operation for safe, unsupervised sterilising cycles.

The 15-litre stainless steel model is also listed for sterilising waste and for destructive sterilisation. Where the electricity supply is unreliable, the Gas Autoclave runs on natural or bottled gas, and the Autoclave Stainless Steel can be heated on charcoal, kerosene, gas or an electric source. The Draining Basket holds and drains glassware and instruments before or after a cycle.

Autoclave specifications

The Classic Standard Autoclave (EL-A-10646) has a 12-litre chamber measuring 210 mm in diameter by 290 mm, sterilises at 121 degrees C and 1.05 bar with a minimum sterilising time of 22 minutes, takes a maximum unwrapped load of 4 kg and weighs 4.3 kg. The Autoclave, Stainless Steel, 15 Litre (EL-A-10647) has a design pressure of 1.3 bar (18 psi), a working temperature of 121 degrees C, internal dimensions of 280 mm by 245 mm and a net weight of 19 kg.

Most Lab Exports products carry a one-year manufacturer warranty. Each autoclave is supplied with installation instructions and a manual.

Autoclave FAQs

Which autoclave can be used without mains electricity?

The Gas Autoclave (EL-A-10648) is heated by natural or bottled gas. The Autoclave Stainless Steel (EL-A-10650) is a multi-fuel steriliser that can be heated on charcoal, kerosene, gas or electricity.

What temperature and pressure do these autoclaves reach?

The Classic Standard Autoclave sterilises at 121 degrees C and 1.05 bar. The 15-litre stainless steel model works at 121 degrees C with a design pressure of 1.3 bar, and the aluminium electric and gas models are listed at 15 psi.

Which model suits a school science laboratory?

The Classic Standard Autoclave is the model designed for school and educational laboratories. It holds 12 litres, runs on a 230 V 1500 W supply and has a minimum sterilising time of 22 minutes.

How is an autoclave priced?

Autoclave prices are not published on the website. Send the EL-A codes and the number of units required to [email protected], or add the autoclave to the Enquiry Cart from its product page, and Lab Exports replies with a quotation.

Related laboratory equipment

Autoclaves are part of the Laboratory Equipment range. Microbiology and media preparation benches also use the Water Bath range, the Hot Plates and the incubator and biosafety cabinet in Laboratory Instruments.

For a quotation, email [email protected] or use the Contact page.