Digital Multimeter Manufacturer,Supplier and Exporter in India
Product Code : SCL-LM-11250
The Digital Multimeter combines an electronic display, rotary function selector, input terminals and test probes in one handheld measuring instrument. The user selects the required function and range, connects the test leads correctly and reads the measured value directly from the LCD.
The pictured instrument supports basic electrical measurement and component-testing activities. Its exact AC and DC ranges, resistance ranges, resolution, accuracy, input impedance, fuse arrangement, continuity function, battery type and electrical safety category are not confirmed. These parameters must be verified before the meter is connected to any circuit.
Key Features
Digital LCD: Presents measured values directly for convenient classroom observation and recording.
Rotary function selector: Allows the user to choose an available measurement function and range.
Multiple electrical measurements: Supports compatible voltage, current and resistance measurements.
Supplied test leads: The pictured configuration includes red and black probes for circuit connection.
Portable design: Suitable for laboratory benches, electronics training and supervised STEM activities.
Supports circuit diagnosis: Helps learners compare expected and measured electrical values.
Direct-reading format: Reduces the need to interpret an analogue pointer scale.
Technical Specifications
|
Specification |
Detail |
|
Product name |
Digital Multimeter |
|
Brand |
Lab Exports |
|
Product category |
Electrical Measuring Instruments and Lab Meters |
|
Display |
Digital LCD |
|
Control type |
Rotary function and range selector |
|
Primary functions |
Compatible voltage, current and resistance measurement |
What's Included in the Kit
One Digital Multimeter
One red test lead
One black test lead
A battery, spare fuse, storage case, instruction manual and calibration certificate are not confirmed as included.
Applications / Uses
Measuring compatible DC and AC voltage
Measuring current within the confirmed meter range
Checking resistor values
Testing batteries and low-voltage power supplies
Investigating Ohm’s law and series or parallel circuits
Supporting basic electronics and vocational training
Locating simple faults in supervised laboratory circuits
How to Use the Digital Multimeter
Inspect the meter, probes and insulation for damage.
Insert the black lead into the common terminal.
Insert the red lead into the terminal specified for the measurement.
Select the correct function and begin with a suitably high range.
Connect in parallel for voltage or in series for current, as instructed.
De-energise the circuit before measuring resistance.
Read the display and record the value with its unit.
Disconnect the probes and return the selector to the off position.
Safety note: Never measure a source above the meter’s confirmed rating. Do not change terminals or functions while connected to an energised circuit. School use must be limited to supervised, suitably protected circuits.
Care & Maintenance
Store the meter and probes in a clean, dry location.
Replace damaged leads before further use.
Remove the battery before prolonged storage where appropriate.
Verify operation against a known source before important measurements.
Why Choose Lab Exports
Lab Exports manufactures and exports scientific instruments, educational experiment setups, science kits, mathematics kits, didactic models and STEM products. Buyers can explore related laboratory meters, electrical and electronics equipment, and the wider physics laboratory equipment range. Required ranges, accuracy, protection features and calibration documentation should be confirmed in the commercial quotation.
Frequently Asked Questions
What is a digital multimeter used for?
A digital multimeter is used to measure compatible electrical quantities such as voltage, current and resistance. Available functions depend on the supplied model.
Can students use this multimeter?
Yes. It is suitable for supervised school, college and vocational experiments using circuits within the confirmed operating limits.
Can it measure both AC and DC voltage?
The pictured selector shows voltage measurement positions, but the exact AC and DC ranges must be verified from the current specification.
How is current measured with a multimeter?
The meter is connected in series using the correct input terminal and range. Incorrect terminal selection can damage the meter or circuit.
Can resistance be measured in a live circuit?
No. Disconnect the power and discharge stored energy before resistance testing.
Is a calibration certificate included?
No calibration certificate is confirmed. Request traceable calibration separately when required for a tender or quality system.
Confirm the required electrical ranges and safety rating with Lab Exports, or browse the complete laboratory equipment range for institutional and export procurement.
Recommended Product Image ALT Text
Digital multimeter for physics lab electrical measurements
Educational digital multimeter with red and black test probes
Electronic meter for voltage current and resistance experiments
School electronics multimeter for supervised circuit testing
Digital Multimeter supplied by Lab Exports
