Steam Heater to Heat Lead Shots Manufacturer,Supplier and Exporter in India

Product Code : SCL-H-11112

The Steam Heater to Heat Lead Shots is a specialized thermodynamics apparatus used for uniformly raising the temperature of metal shots using steam. Designed for high school and university physics laboratories, its core benefit is providing a precise, moisture-free heating environment essential for accurate specific heat capacity and thermal equilibrium experiments.

Product Description

The Steam Heater to Heat Lead Shots utilizes a highly efficient double-walled cylindrical design. An outer jacket circulates steam from a standard laboratory steam generator, safely transferring thermal energy to the inner heating chamber. This structural isolation ensures that the lead or copper shots inside absorb maximum heat while remaining completely dry, preventing moisture contamination that could skew calorimetric calculations.

Constructed from highly conductive and corrosion-resistant materials such as spun copper or brass [confirm], this device is built to withstand repeated exposure to high temperatures and steam. It is an essential addition to any suite of physics lab equipment, enabling educators to demonstrate foundational laws of thermodynamics with consistent, reliable results.

Key Features

Moisture Isolation Design: The double-walled construction ensures metal shots reach thermal equilibrium with the steam without getting wet.

High Thermal Conductivity: Manufactured from premium copper or brass [confirm] for rapid and even heat distribution.

Secure Steam Routing: Features dedicated, ribbed inlet and outlet tubes to easily attach steam generator hoses.

Integrated Thermometer Port: The top lid includes a precisely sized opening to accommodate a standard laboratory thermometer for real-time temperature tracking.

Generous Capacity: The inner chamber is designed to hold up to 500g [confirm] of lead shots, suitable for a variety of experimental setups.

High Durability: Rust-resistant and thermally stable, ensuring a long operational lifespan in busy educational labs.

Technical Specifications

What's Included in the Kit

1 x Double-Walled Steam Heater Cylinder

1 x Inner Chamber / Dipper for Metal Shots

1 x Removable Lid with Thermometer Port

1 x Instructional Manual

Applications / Uses

Specific Heat Capacity Determination: Heating lead shots to a known temperature before transferring them to calorimeters to measure temperature change.

Thermal Equilibrium Studies: Demonstrating how heat transfers between different states of matter until equilibrium is reached.

Phase Change and Heat Transfer: Serving as a consistent, high-temperature thermal source for introductory thermodynamics demonstrations.

Laboratory Protocol Training: Teaching students the proper, safe handling of heated materials and steam in a controlled environment.

How to Use the Steam Heater to Heat Lead Shots

Loading: Weigh the desired quantity of dry lead shots and place them carefully into the inner chamber of the heater. Secure the lid.

Connecting Steam: Attach a high-temperature silicone tube from your steam generator to the lower steam inlet. Attach a second tube to the upper steam outlet, directing it to a safe sink or catch basin.

Monitoring: Insert a laboratory thermometer through the hole in the lid so the bulb is fully embedded in the lead shots.

Heating: Activate the steam generator. Allow steam to flow through the outer jacket until the thermometer indicates a stable maximum temperature (typically near 100°C).

Transferring: Quickly open the lid and pour the heated shots into a prepared calorimeter to record the subsequent temperature changes.

Safety/Handling Note: The exterior metal surfaces will become dangerously hot during operation. Always wear insulated, heat-resistant lab gloves and use tongs when handling the apparatus.

Care & Maintenance

Thorough Drying: After use, disconnect all hoses and allow the unit to cool. Thoroughly dry the inner chamber and outer jacket to prevent oxidation.

Descaling: If using hard tap water in the steam generator, periodically flush the steam jacket with a mild descaling agent to remove mineral buildup.

Proper Storage: Store in a cool, dry cabinet alongside other thermodynamics apparatus to maintain its condition.

Why Choose Lab Exports

Lab Exports is a leading global manufacturer and exporter of scientific didactic models and laboratory equipment. With extensive manufacturing expertise, we focus on engineering robust, accurate tools that meet the rigorous demands of modern education. Our commitment to quality control ensures that every instrument provides reliable performance for educators and students alike. With a vast global supply chain, Lab Exports is a trusted partner for outfitting educational institutions worldwide.

Frequently Asked Questions

What is the Steam Heater to Heat Lead Shots used for?

It is used in physics experiments to uniformly heat metal shots (like lead or copper) using steam, primarily for determining specific heat capacity via calorimetry.

How does it keep the lead shots dry?

The apparatus features a double-walled design. Steam circulates in the outer jacket to provide heat, while the lead shots remain isolated in a sealed inner chamber, preventing moisture contact.

What material is this apparatus made of?

It is generally manufactured from high-quality copper or brass, which are chosen for their excellent thermal conductivity and resistance to steam-induced corrosion.

Do I need additional equipment to use this?

Yes, you will require a separate laboratory steam generator, high-temperature silicone hosing, a thermometer, and lead shots to conduct the heating experiments.

Can it be used in high school science labs?

Yes, it is specifically designed for educational environments, including high schools and introductory university physics courses, though strict thermal safety protocols must be followed.

Discover more high-quality, precision-engineered educational tools by browsing our complete catalog of laboratory instruments today.